There are many people who use power scooters
or wheelchairs, either because they are unable to stand for extended periods of
time or because their legs do not operate in the right manner. In simple terms,
a Residential Aluminum Ramps Staten Island is an inclining plane that facilitates people who
use wheelchairs to gain access to their homes or other construction. Being able
to enter and leave your house or access establishments is something many people
ignore.
The slope of such ramps is significant
because certain angles are too hard to move around from a wheelchair. Both
modular and portable ramps take this into account in their style and design.
Permanent ramps, whether modular or wooden is created while this in mind. Laws
have been issued to help protect wheelchair users when businesses install
ramps, making sure that this slope is within the right specifications.
When considering the design of your
Residential Aluminum Ramps Staten Island, you should consider these things:
Ramp Size
Because every scooter or wheelchair user is
different, all these conveyances have different specifications. You can get
these measurements on the box or in the pages of the manual, but normally the
recommended ratio is 1 to 12 for establishments. Every single inch of incline
requires one foot of ramp. For residential recommendation, from 2 to 12, which
is for every inch of incline it needs a 1 foot of ramp. Scooters need a 3 to 12
ratio. Therefore, to build a ramp you need to measure the length of the stairs
that would need covering and figure depending on that.
Ramp Types
There are several various kinds of wheelchair
ramps including vehicle, portable, modular, and wooden. Portable ramps can be
folded and brought with you and are normally used to overcome smaller obstacles
such as a few entry stairs. They are quite strong and make going to new
locations much simpler. Modular ramps are long lasting and are constructed from
aluminum so they last a very long time. Even though they are permanent, they
can be relocated. Considering they are aluminum, they do not decay.
They have handrails and are easy to set up,
though best installed by an expert. Wooden ramps are the traditional wheelchair
ramps. They are permanent and are hard to move without destroying them. They
may or may not have hand railing although handrails and edge barriers must
always be installed for scooter users and wheelchairs.
Vehicle ramps are utilized to make entering
or exiting a vehicle easier and are mounted on the back or side of a van, or
huge vehicle. If you need to set up a wheelchair ramp for a business or school,
modular ramps should meet the standard recommendations and are a smart
investment as they do not have to be treated or painted.
Ramp Functionality
Every person has different disability. The
functionality of a residential aluminum ramp is only beneficial if designed
properly. Because handicapped people use these ramps in different capabilities
such as to access the entrances of public places, getting in and out of
automobiles, into buildings or the street, it is quite important to keep their
needs as the primary goal.
